October 27, 2008
Surveying Equipment
As late as the 1990s the basic tools used in planar surveying were a tape measure for determining shorter distances, a level for determine height or elevation differences, and a theodolite, set on a tripod, with which one can measure angles (horizontal and vertical), combined with triangulation. Starting from a position with known location and elevation, the distance and angles to the unknown point are measured. A more modern instrument is a total station, which is a theodolite with an electronic distance measurement device (EDM) and can also be used for leveling when set to the horizontal plane. Since their introduction, total stations have made the technological shift from being optical-mechanical devices to being fully electronic with an onboard computer and software. Modern top-of-the-line total stations no longer require a reflector or prism (used to return the light pulses used for distancing) to return distance measurements, are fully robotic, and can even e-mail point data to the office computer and connect to satellite positioning systems, such as a Global Positioning System (GPS). Though GPS systems have increased the speed of surveying, they are still only horizontally accurate to about 20 mm and vertically accurate to about 30-40 mm.As well GPS systems do not work in areas with dense tree cover. It is because of this that total stations have not completely phased out earlier instruments. Robotics allows surveyors to gather precise measurements without extra workers to look through and turn the telescope or record data. A faster way to measure (no obstacles) is with a helicopter with laser echolocation, combined with GPS to determine the height of the helicopter. To increase precision, beacons are placed on the ground (about 20 km apart). This method reaches a precision of about 5 mm.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment